Discuss, share information, ask questions, and show off your expertise on Yoder ACS Pellet Cookers.

Click the links below to go directly to available resources:
**Pellet cookers** - YS480, YS640
**Competition Pellet cookers** - YS480 Comp, YS640 Comp, YS1500 Comp, Cimarron Comp
**Pellet Cooker Warranty**
Forum rules
Post a reply

Need Help -CimarronS

September 23rd, 2023, 1:32 am
#1
Mbuxx
* Abilene ** Abilene *
  • Joined: September 14th, 2023, 5:32 pm
  • Posts: 6

Need Help -CimarronS

Hello,

I think something is wrong. If I set my pit to 250, I feel like the controller says its 250, but its no where close. Door thermos(i know these are not complexly accurate - also calibrated to 212) are generally around 100. I know the temp is low, because stuff takes forever to cook, and I mean forever. Around 20 hours.

How exactly do I get the pit temp to what I set it at?

I did the ACS temp, with the probes on the grate, and they do read close to what the controller is set at. The problem is the grate temp seems to vary considerably from the ambient temp of the pit.

Post a reply

Return to ACS Pellet

Disclaimer :
The views and comments entered in these forums are personal and are not necessarily those of the management of this board.