Discuss, share information, ask questions, and show off your expertise on Yoder ACS Pellet Cookers.

Click the links below to go directly to available resources:
**Pellet cookers** - YS480, YS640
**Competition Pellet cookers** - YS480 Comp, YS640 Comp, YS1500 Comp, Cimarron Comp
**Pellet Cooker Warranty**
August 11th, 2023, 12:15 pm
#1
* Abilene ** Abilene *
  • Joined: March 25th, 2019, 5:32 pm
  • Posts: 2

I just installed a new thermocouple on my 640s per the instructions and the control board is reading 0 degrees. I thought I might need to swap the white and red wires, so I did and it's still reading 0.

Have a big cook tonight and I'm getting nervous.

Any advice?

August 12th, 2023, 6:40 am
#2
* Abilene ** Abilene *
  • Joined: March 25th, 2019, 5:32 pm
  • Posts: 2

Update: Got a call from Joey at Yoder (amazing gentleman btw) and as it turns out, I have the new board that takes a different type of thermocouple/wiring. The new one has 2 white wires and the old one has a red and a white wire. Using the old red and white wire thermocouple resulted in a 0 degree reading on the new board (as expected). He's sending me the new model and should be good to go. Huge thank you to Joey and Yoder for incredible customer service!

Return to ACS Pellet