Discuss, share information, ask questions, and show off your expertise on Yoder ACS Pellet Cookers.

Click the links below to go directly to available resources:
**Pellet cookers** - YS480, YS640
**Competition Pellet cookers** - YS480 Comp, YS640 Comp, YS1500 Comp, Cimarron Comp
**Pellet Cooker Warranty**
April 8th, 2022, 8:18 pm
#1
* Cheyenne ** Cheyenne *
  • Joined: September 8th, 2014, 2:25 pm
  • Posts: 52

Has anyone with the acs controller had the display read only 0f for the pit temp?


I just finished the retrofit and everything went smoothly with great instructions until the first cook where it seems that the controller is not reading the thermocouple.

The display is stuck at 0f and the pit just keeps heating up and up.

Also when I powered it off the fans only ran for a minute or two as it thought it was already cool. I had to power it back on for a while to run the fan

Really excited about the functionality of the new options but I need to get this bug worked out first

April 9th, 2022, 10:39 pm
#2
* Cheyenne ** Cheyenne *
  • Joined: September 8th, 2014, 2:25 pm
  • Posts: 52

Yoder customer service contacted me last night and helped diagnose the problem. (On a Friday night!)

Turns out the kit had the wrong thermocouple in the box and they are express shipping me the right one.

Return to ACS Pellet


cron