Discuss, share information, ask questions, and show off your expertise on Yoder ACS Pellet Cookers.

Click the links below to go directly to available resources:
**Pellet cookers** - YS480, YS640
**Competition Pellet cookers** - YS480 Comp, YS640 Comp, YS1500 Comp, Cimarron Comp
**Pellet Cooker Warranty**
February 24th, 2021, 6:25 pm
#1
* Abilene ** Abilene *
  • Joined: January 15th, 2021, 4:08 pm
  • Posts: 5

Last 3 times i have plugged in my 640 it has stated that it is "Updating firmware to version 1.0.19" and shows 100% complete. After the cook I shutdown the pit and unplug it. Yet when the pit is started again the next day it reverts to the same "Updating firmware to version 1.0.19" .....After it says it is complete if I go into the acs settings on the pit it still shows 1.0.18.....Any suggestions or procedures to have the update take?
Thanks

February 27th, 2021, 6:39 pm
#2
* Abilene ** Abilene *
  • Joined: January 15th, 2021, 4:08 pm
  • Posts: 5

O.K. nobody how bout what version is the current version of firmware are people running?

February 28th, 2021, 11:32 pm
#3
* Abilene ** Abilene *
  • Joined: November 17th, 2020, 5:10 pm
  • Posts: 2

I'm having the same issue also on the 1.0.18 forward.

Do we have a resolution?

March 3rd, 2021, 4:55 pm
#4
* Abilene ** Abilene *
  • Joined: January 15th, 2021, 4:08 pm
  • Posts: 5

i think the board has been abandoned lol either way I contacted Fireboard and they were able to provide a fix.

April 22nd, 2021, 11:34 am
#5
* Abilene ** Abilene *
  • Joined: November 17th, 2020, 5:10 pm
  • Posts: 2

What as the fix Fireboard provided?

Return to ACS Pellet


cron