Here is where we will post new and breaking information about Yoder Smokers and it's products.
January 19th, 2022, 10:06 am
#1
Site AdminSite Admin
User avatar
  • Joined: August 15th, 2014, 10:48 am
  • Posts: 29

With the recent change to the ACS controller that is now requiring the PT1000 probe, it is important that the correct probe is installed in an S-Series pellet grill. Using the incorrect probe WILL cause the controller to operate improperly. Click on the link below to learn how to check this on your grill.

How to verify the probe type in an ACS grill

Please contact Customer Service with any questions.

January 19th, 2022, 10:42 pm
#2
* Cheyenne ** Cheyenne *
User avatar
  • Joined: July 6th, 2016, 11:47 pm
  • Posts: 50
  • Location: Third Planet From The Sun, US of A, CT

and how do you tell the difference between the two type of probes?

One If By Land
Two If By Sea
Three If By Limo
January 20th, 2022, 8:50 am
#3
Site AdminSite Admin
User avatar
  • Joined: August 15th, 2014, 10:48 am
  • Posts: 29

The old Type J thermocouple has the red and white wires coming out of the steel braided cover. Both of the wires on the PT1000 are white.

Return to News and Announcements