Page 1 of 1

YS640 igniter

PostPosted: June 26th, 2021, 12:00 pm
by TheSandman23k
This will be the 3rd time using my new Yoder and I believe the fire starter is already out. I clean it every use. Checked to see if it was loose and it was not. Is this common?

Re: YS640 igniter

PostPosted: June 26th, 2021, 10:26 pm
by Conumdrum
The "Firestarter" will stay heated for 5 minutes to start the small pile of pellets delivered by the auger.

No need to clean the 'Firestarter" Just brush it off and remove the ash from the last cook.

Re: YS640 igniter

PostPosted: June 27th, 2021, 3:27 pm
by TheSandman23k
I cleaned all the ash today after yesterday’s smoked chicken and the fire starter fired right up for Beef Short Ribs. Thanks for the help.