Discuss, share information, ask questions, and show off your expertise on Yoder Pellet Cookers.

Click the links below to go directly to available resources:
**Pellet cookers** - YS480, YS640
**Competition Pellet cookers** - YS480 Comp, YS640 Comp, YS1500 Comp, Cimarron Comp
**Pellet Cooker Warranty**
October 14th, 2020, 1:00 am
#1
* Abilene ** Abilene *
  • Joined: October 14th, 2020, 12:54 am
  • Posts: 1

Just received my brand new YS640s today. Literally has never been used.

By looking at the manual, it says to make sure the area above the firebox is sealed at the hopper wall.

But when looking at mine, I don’t see any sealant here at all. Was something missed when it was built? Is this an issue?

I already have an email out to customer service, but I figured it may be worth posting here as well.

Attachments
A1067D2C-CE65-4697-9043-F49A96F262B8.jpeg
October 14th, 2020, 12:22 pm
#2
* Wichita ** Wichita *
  • Joined: July 25th, 2015, 1:21 pm
  • Posts: 145

I am not familiar with the newer version of the firebox but either way I would hunt down some permatex. I used the copper variety and has worked well for over two years.

October 15th, 2020, 10:54 am
#3
Site AdminSite Admin
User avatar
  • Joined: August 15th, 2014, 10:48 am
  • Posts: 33

That area has silicone applied between the firepot and chamber wall. Some silicone may be visible and is jus the excess amount that was used. You may choose to apply silicone along the top edge but is not required.

Return to Pellet