Discuss, share information, ask questions, and show off your expertise on Yoder ACS Pellet Cookers.

Click the links below to go directly to available resources:
**Pellet cookers** - YS480, YS640
**Competition Pellet cookers** - YS480 Comp, YS640 Comp, YS1500 Comp, Cimarron Comp
**Pellet Cooker Warranty**
March 8th, 2020, 11:13 am
#1
* Abilene ** Abilene *
  • Joined: July 17th, 2016, 1:37 pm
  • Posts: 2

I upgraded my YS480 to the ACS controller and replaced my temp probe while I was at it as it was broken.

After I got everything installed and fired up, the two external probes have a 35 deg offset to my Pit probe.

The PIT probe is INCORRECT vs the external probes, I verified it with a my normal pit vs food monitor I used to use.

I know I can do a calibration (Read the posts) but good lord, this offset is massive. I am starting to think my new probe is Dead on Arrival..

Anyone else see an offset this big before between pit and external probes on the acs?

March 9th, 2020, 11:17 am
#2
Site AdminSite Admin
User avatar
  • Joined: April 18th, 2014, 3:12 pm
  • Posts: 2408

Here is the calibration process: http://community.yodersmokers.com/viewt ... =73&t=2033

If you need more help, please contact us directly at customerservice@yodersmokers.com so we may properly help.

Yoder_Herb

Return to ACS Pellet


cron