September 5th, 2015, 7:50 pm
* Abilene *
- Joined: September 5th, 2015, 7:13 pm
- Posts: 1
This new rev seems to run with swings of 30+, never seem to really settle down to the plus or minus 10 degrees of my U26 rev level unit? Have had several customers report this to us. Anyone else having this issue?
November 18th, 2015, 12:49 pm
* Abilene *
- Joined: June 13th, 2015, 3:46 pm
- Posts: 9
- Location: Bonsall, CA
Same problem here
Sal
Yoder YS640
November 18th, 2015, 1:32 pm
Site Admin
- Joined: April 18th, 2014, 3:12 pm
- Posts: 2408
November 19th, 2015, 12:06 am
* Abilene *
- Joined: June 20th, 2015, 10:14 pm
- Posts: 5
Yoder Herb,
If I bought my Yoder YS640 thru ATBQ do I contact them for the firmware update?
Jerry
November 19th, 2015, 12:08 am
Site Admin
- Joined: April 18th, 2014, 3:12 pm
- Posts: 2408
If you are local to Wichita, feel free to contact them. If not, fax the form back to us and we will take care of you directly.
Yoder_Herb
November 24th, 2015, 11:49 pm
* Abilene *
- Joined: June 13th, 2015, 3:46 pm
- Posts: 9
- Location: Bonsall, CA
Updated to U29 today, fired up and what a difference! Thanks guys!
Sal
Yoder YS640
December 13th, 2015, 4:14 pm
* Abilene *
- Joined: October 4th, 2015, 7:41 pm
- Posts: 20
- Location: Lincoln illinois
how do I find out if I need to update the computer system on my 640
yoder 640
December 13th, 2015, 5:34 pm
* Abilene *
- Joined: October 4th, 2015, 7:41 pm
- Posts: 20
- Location: Lincoln illinois
ok does the v29 upgrade make a difference, I figured out I am running v28 from mid this year.
yoder 640
December 13th, 2015, 5:42 pm
Site Admin
- Joined: April 18th, 2014, 3:12 pm
- Posts: 2408
Yes, it make a difference. It is not a requirement to update.
Yoder_Herb
December 13th, 2015, 7:15 pm
* Abilene *
- Joined: October 4th, 2015, 7:41 pm
- Posts: 20
- Location: Lincoln illinois
ok, if it makes my grill work better, then to me its worth keeping everything up to date. I'll fax the form this week. what's the turn around time been running for the update equipment?
yoder 640
December 14th, 2015, 7:15 pm
Site Admin
- Joined: April 18th, 2014, 3:12 pm
- Posts: 2408
After we receive the FAX, your name goes on the list to get sent a programmer. There could be one available immediately, or if not, when one becomes available for your position on the list. We have many programmers rotating out to customers at any given point in time, so it is hard to give you an exact timeframe.
Yoder_Herb
December 15th, 2015, 7:55 am
* Abilene *
- Joined: October 4th, 2015, 7:41 pm
- Posts: 20
- Location: Lincoln illinois
talked to Joey yesterday and he got my fax and I think I will be lucky enough to get one pretty quick.
yoder 640
December 16th, 2015, 9:57 pm
* Abilene *
- Joined: October 4th, 2015, 7:41 pm
- Posts: 20
- Location: Lincoln illinois
Got o say thanks to Joey at customer support. He got me the flash drive and cable very quickly. I'm going to put it back in the mail tomorrow after work so it can be sent back out.
yoder 640
Return to Manuals, Troubleshooting, Best Practices, FAQs, Cooker Registration