Click the links below to go directly to available resources:
**Frequently Asked Questions**
**Register Your Yoder Cooker**
**Find a Dealer**
**The Yoder Smokers Blog**
March 11th, 2015, 2:14 pm
#1
* Abilene ** Abilene *
  • Joined: March 5th, 2015, 1:09 pm
  • Posts: 2

I received my ys640 last week. The unit was built on 1-30-15. I noticed that the probe that is hooked up to the unit is not on the rear wall near the bottom grate but is on the left wall just under the bottom grate. My unit also has firmware U27. I have noticed during my cooks the temp is running a lot lower on my probes compared to what the unit is reading. The temps are anywhere from 20-60 degrees lower. I set up 3 probes in different spots. I don't really understand the difference in temps. For how much money I spent on the unit I really don't think I should have to set the temp higher on the unit to actually get the temp I want. I have been running the unit in 50 degree weather. Please help!

March 12th, 2015, 12:26 am
#2
Site AdminSite Admin
User avatar
  • Joined: April 18th, 2014, 3:12 pm
  • Posts: 2408

Return to Manuals, Troubleshooting, Best Practices, FAQs, Cooker Registration