Click the links below to go directly to available resources:
**Frequently Asked Questions**
**Register Your Yoder Cooker**
**Find a Dealer**
**The Yoder Smokers Blog**
December 8th, 2014, 1:42 pm
#1
* Abilene ** Abilene *
  • Joined: September 14th, 2014, 10:06 am
  • Posts: 4

How does one go about getting a couple of parts to have on hand for the YS640? I would like to have an ignitor and a temperature probe.

Also does anyone have a good way of protecting the wire that runs to the temp. probe? I don't like how the grates can smash it when installing them.

YS640-Smoking the neighbors out!!
December 8th, 2014, 3:06 pm
#2
Site AdminSite Admin
User avatar
  • Joined: April 18th, 2014, 3:12 pm
  • Posts: 2408

You may call Yoder Smokers at 877-409-6337 and select sales, or visit www.ATBBQ.com and order from the web. If you have a dealer in the area, they will also have the parts for purchase.

The thermocouple cable is armored, and should not have a problem. You can put a dab of high heat silicone on the cable at the grate rail if you desire.

Yoder_Herb
December 8th, 2014, 3:10 pm
#3
* Abilene ** Abilene *
  • Joined: September 14th, 2014, 10:06 am
  • Posts: 4

Thanks!! I checked ATBBQ but didn't see the parts. I'll look again.

YS640-Smoking the neighbors out!!
December 8th, 2014, 3:26 pm
#4
Site AdminSite Admin
User avatar
  • Joined: April 18th, 2014, 3:12 pm
  • Posts: 2408

Type thermocouple or igniter into the search box.

Yoder_Herb
December 8th, 2014, 3:32 pm
#5
* Abilene ** Abilene *
  • Joined: September 14th, 2014, 10:06 am
  • Posts: 4

Will do. Thanks!

YS640-Smoking the neighbors out!!
December 8th, 2014, 10:14 pm
#6
* Abilene ** Abilene *
  • Joined: September 14th, 2014, 10:06 am
  • Posts: 4

Found the parts. Thanks for the help!

YS640-Smoking the neighbors out!!

Return to Manuals, Troubleshooting, Best Practices, FAQs, Cooker Registration