Click the links below to go directly to available resources:
**Frequently Asked Questions**
**Register Your Yoder Cooker**
**Find a Dealer**
**The Yoder Smokers Blog**
December 29th, 2019, 11:52 am
#1
* Abilene ** Abilene *
  • Joined: January 22nd, 2018, 12:21 am
  • Posts: 5

My YS640 blows the blows the fuse 4 mins after start. Igniter gets hot enough to light the pellets before the fuse blows. If I disconnect the igniter and use a lighter to light the pellets, the fuse does not blow. Will replacing the igniter resolve this issue? If so, do you recommend I replace with the YS Series Ceramic Pellet Grill Igniter? My YS640 was manufactured on 040418, serial number 37337, has firmware U29 installed and delivered May 18.

December 29th, 2019, 11:57 am
#2
Site AdminSite Admin
User avatar
  • Joined: April 18th, 2014, 3:12 pm
  • Posts: 2408

Yes, replace the igniter.

The ceramic igniter has a 3 year warranty, but does not preclude the requirement to remove the ash from the burn grate prior to each use.

Yoder_Herb
December 29th, 2019, 12:04 pm
#3
* Abilene ** Abilene *
  • Joined: January 22nd, 2018, 12:21 am
  • Posts: 5

Thank you for the quick response to my query. I do remove the ash from the burn grate before every smoke. I'll order a ceramic igniter today. Hope you have a great New Year!

Return to Manuals, Troubleshooting, Best Practices, FAQs, Cooker Registration


cron