YS640 blows fuse after startup
Posted: December 29th, 2019, 11:52 am
My YS640 blows the blows the fuse 4 mins after start. Igniter gets hot enough to light the pellets before the fuse blows. If I disconnect the igniter and use a lighter to light the pellets, the fuse does not blow. Will replacing the igniter resolve this issue? If so, do you recommend I replace with the YS Series Ceramic Pellet Grill Igniter? My YS640 was manufactured on 040418, serial number 37337, has firmware U29 installed and delivered May 18.