Click the links below to go directly to available resources:
**Frequently Asked Questions**
**Register Your Yoder Cooker**
**Find a Dealer**
**The Yoder Smokers Blog**
November 14th, 2018, 12:15 pm
#1
* Abilene ** Abilene *
  • Joined: November 14th, 2018, 11:04 am
  • Posts: 1

I have an older model YS640 that has the thermocoupler on the back wall. I am hoping to get enough support from others with the same situation to get Yoder to make a way for us to move the thermocoupler to the side wall and bring our smokers up to date including updating the firmware. This will obvisouly involve welding a mount for the relocated thermocoupler so his kit would be limited to those with the ability to do this.

If you are intersted in this, please reply so we can see who all is interested.

November 15th, 2018, 9:12 am
#2
* Kingman ** Kingman *
  • Joined: September 3rd, 2014, 11:04 pm
  • Posts: 422

I'd like to know if there are any advantages to buying a kit with new parts etc. Does it increase the temp control ability? And that bracket could be easily pop riveted to the wall.

November 17th, 2018, 11:19 am
#3
* Abilene ** Abilene *
  • Joined: January 18th, 2016, 8:57 pm
  • Posts: 26

I am also interested, if it makes a difference.

Return to Manuals, Troubleshooting, Best Practices, FAQs, Cooker Registration