Click the links below to go directly to available resources:
**Frequently Asked Questions**
**Register Your Yoder Cooker**
**Find a Dealer**
**The Yoder Smokers Blog**
February 25th, 2018, 10:03 am
#1
* Abilene ** Abilene *
  • Joined: May 18th, 2015, 11:04 pm
  • Posts: 4
  • Location: Sedro Woolley

Hi what is the current firmware, and can I update a older version to the newer one

Thanks

February 25th, 2018, 10:14 am
#2
Site AdminSite Admin
User avatar
  • Joined: April 18th, 2014, 3:12 pm
  • Posts: 2249

What is your current firmware? This is displayed for 2 seconds after flipping then power switch to the ON position.

Yoder_Herb
February 25th, 2018, 12:48 pm
#3
* Abilene ** Abilene *
  • Joined: May 18th, 2015, 11:04 pm
  • Posts: 4
  • Location: Sedro Woolley

It is v26 I see that newer models have the thermocouple in a different location. Does this make it preform better? If so can I relocate my thermocouple and update to the latest firmware?

February 25th, 2018, 12:52 pm
#4
Site AdminSite Admin
User avatar
  • Joined: April 18th, 2014, 3:12 pm
  • Posts: 2249

You have the most current firmware for your cooker. Moving the thermocouple will completely throw off your controller. At this time, there is not an upgrade available for your cooker. It is up to date.

Yoder_Herb
February 25th, 2018, 12:57 pm
#5
* Abilene ** Abilene *
  • Joined: May 18th, 2015, 11:04 pm
  • Posts: 4
  • Location: Sedro Woolley

Thanks I was hoping there was something I could do. Right now it’ll drop into maintain mode and still be 100° Lower then the set temperature and Has a hard time maintaining the correct temperature

February 25th, 2018, 1:00 pm
#6
Site AdminSite Admin
User avatar
  • Joined: April 18th, 2014, 3:12 pm
  • Posts: 2249

The best thing is to contact us for support via phone at 877.409.6337, option 2 or email at customerservice@yodersmokers.com so we may better address your concern.

Yoder_Herb
April 12th, 2018, 5:15 pm
#7
* Abilene ** Abilene *
  • Joined: April 12th, 2018, 5:08 pm
  • Posts: 3

I'm on 24. How do I get the latest firmware and upgrade instructions?

Return to Manuals, Troubleshooting, Best Practices, FAQs, Cooker Registration