Page 1 of 1


PostPosted: April 22nd, 2017, 3:24 pm
by bmcfarland24
Upon start up the unit feeds pellets and everything seems good until the temp indicator climbs to 586. Temp indicator remains as 586 with the "down temp" indicator. Pit is actually running about 280 based on probe temp. I've tried restarting and umpluging now a few times. Just replace the themocouple about 2 years ago. Pit is YS640 July 2013 model. Fermware U26 I beleive


Re: Thermocouple?

PostPosted: April 22nd, 2017, 3:27 pm
by Yoder_Herb
Sorry to hear you are having an issue. Please send the serial number, build date, shipping address, your contact phone number and a description of the problem you are experiencing, to so you may be properly helped. Thanks.

Re: Thermocouple?

PostPosted: April 22nd, 2017, 4:26 pm
by bmcfarland24
I knew you'd be on this quickly. Thanks as usual, Yoder is the best.

Re: Thermocouple?

PostPosted: October 29th, 2017, 6:22 pm
by DirtFarmer
I am having the same problem except with a 480. Start up went fine, indicated temperature climbed to 648 very quickly. Did a shut down and unplugged the unit, restarted - same issue. Smoking a couple of turkey tenderloins so I just kept priming.