Click the links below to go directly to available resources:
**Frequently Asked Questions**
**Register Your Yoder Cooker**
**Find a Dealer**
**The Yoder Smokers Blog**
December 7th, 2016, 7:26 am
#1
* Abilene ** Abilene *
  • Joined: November 27th, 2016, 6:31 am
  • Posts: 6
  • Location: Southern Illinois

My Yoder didn't come with temp probe ports. Is this something I can add myself or would it void the warranty?

December 7th, 2016, 10:09 am
#2
December 7th, 2016, 1:58 pm
#3
* Abilene ** Abilene *
  • Joined: November 27th, 2016, 6:31 am
  • Posts: 6
  • Location: Southern Illinois

Thanks!

December 7th, 2016, 2:10 pm
#4
* Abilene ** Abilene *
  • Joined: November 27th, 2016, 6:31 am
  • Posts: 6
  • Location: Southern Illinois

Do you know if the igrill 2 probes with the silicone bands will fit through them?

December 7th, 2016, 2:12 pm
#5
Site AdminSite Admin
User avatar
  • Joined: April 18th, 2014, 3:12 pm
  • Posts: 2408

Not sure as I do not have an igrill.. I would call ATBBQ and ask.

Yoder_Herb
December 9th, 2016, 9:09 pm
#6
* Kingman ** Kingman *
  • Joined: September 3rd, 2014, 11:04 pm
  • Posts: 422

Drill a hole and buy a high temp silicon gasket like I did from McMaster Carr. Think it was $10 for 10 gaskets etc. Gave most of them away on this site and others, I only needed one....

Right hand column is to 500f. Pick your size and drill.

This post might be modified. You can't post helpful links because this is a business forum and things like this get deleted, not my first time. $10 vs $29 is an issue.

Return to Manuals, Troubleshooting, Best Practices, FAQs, Cooker Registration