Yoder Smokers Community Forum

Posted: **October 14th, 2015, 2:11 pm**

Are the probe ports that you sell as an option on a new cooker and as a retrofit for cookers that are already in use made special for Yoder Smokers or are they just a stainless steel cable gland?

Posted: **October 14th, 2015, 8:08 pm**

The probe port is not specific to Yoder. Not sure what the specification is for the part, but there are different sizes depending on the cookers.

Posted: **October 14th, 2015, 8:23 pm**

Could you tell me what size is used on the YS640?

Posted: **October 14th, 2015, 8:40 pm**

The best place to look is on ATBBQ.COM, and search for Yoder probe port. The install instructions are under the service documents area, and specify drilling a 5/8" hole.

Posted: **October 14th, 2015, 9:10 pm**

Here are the install instructions: viewtopic.php?f=62&t=361

Here is the ATBBQ.com link: http://www.atbbq.com/store/nsearch?sear ... mit=Search

Yoder Smokers Community Forum

Probe port

Probe port

Re: Probe port

Re: Probe port

Re: Probe port

Re: Probe port