Discuss, share information, ask questions, and show off your expertise on Yoder Pellet Cookers.

Click the links below to go directly to available resources:
**Pellet cookers** - YS480, YS640
**Competition Pellet cookers** - YS480 Comp, YS640 Comp, YS1500 Comp, Cimarron Comp
**Pellet Cooker Warranty**
Forum rules
Post a reply

Probe port

October 14th, 2015, 2:11 pm
#1
Vicep3
* Abilene ** Abilene *
  • Joined: August 17th, 2014, 9:04 am
  • Posts: 9

Probe port

Are the probe ports that you sell as an option on a new cooker and as a retrofit for cookers that are already in use made special for Yoder Smokers or are they just a stainless steel cable gland?

October 14th, 2015, 8:08 pm
#2
Yoder_Herb
Site AdminSite Admin
User avatar
  • Joined: April 18th, 2014, 3:12 pm
  • Posts: 2408

Re: Probe port

The probe port is not specific to Yoder. Not sure what the specification is for the part, but there are different sizes depending on the cookers.

Yoder_Herb
October 14th, 2015, 8:23 pm
#3
Vicep3
* Abilene ** Abilene *
  • Joined: August 17th, 2014, 9:04 am
  • Posts: 9

Re: Probe port

Could you tell me what size is used on the YS640?

October 14th, 2015, 8:40 pm
#4
Yoder_Herb
Site AdminSite Admin
User avatar
  • Joined: April 18th, 2014, 3:12 pm
  • Posts: 2408

Re: Probe port

The best place to look is on ATBBQ.COM, and search for Yoder probe port. The install instructions are under the service documents area, and specify drilling a 5/8" hole.

Yoder_Herb
October 14th, 2015, 9:10 pm
#5
Yoder_Herb
Site AdminSite Admin
User avatar
  • Joined: April 18th, 2014, 3:12 pm
  • Posts: 2408

Re: Probe port

Here are the install instructions: viewtopic.php?f=62&t=361

Here is the ATBBQ.com link: http://www.atbbq.com/store/nsearch?sear ... mit=Search

Yoder_Herb
Post a reply

Return to Pellet

Disclaimer :
The views and comments entered in these forums are personal and are not necessarily those of the management of this board.