Discuss, share information, ask questions, and show off your expertise on Yoder Pellet Cookers.

Click the links below to go directly to available resources:
**Pellet cookers** - YS480, YS640
**Competition Pellet cookers** - YS480 Comp, YS640 Comp, YS1500 Comp, Cimarron Comp
**Pellet Cooker Warranty**
October 2nd, 2014, 6:35 am
#1
* Abilene ** Abilene *
  • Joined: August 15th, 2014, 11:44 am
  • Posts: 33
  • Location: Argyle, TX

In this day and age of mass marketing and poor customer service, it's great to have a product where their customer service is A+. Friday night about 9:30 I fired up my 640. Did it's usual thing started without a hitch. Then I noticed that the controller was showing my temperatures climbing like there was a blazing inferno going on. I opened the lid and it was barely warm. My Mavericks were reading 138. I always unplug my grill and the week before I cleaned everything including the thermocouple. I shut it down, let it cycle off, emptied the burn grate and tried it again, same results. My guess was the thermocouple went bad. Shut it down, put the brisket in the oven :cry: . At 10:00PM I emailed Yoder Customer Service. By 10:30 I received a reply and they confirmed it was probably my thermocouple. Monday they shipped the new part and it arrived yesterday. Try getting that service anywhere else.

We all know that there are parts that will fail once and awhile and when something happens it's great to have the Yoder Team respond like they did.

Thank you YODER!

October 2nd, 2014, 8:06 am
#2
* Kingman ** Kingman *
User avatar
  • Joined: August 25th, 2014, 10:28 am
  • Posts: 268

Great story. +1 on the quality of the Yoder customer service and support!

October 2nd, 2014, 10:25 am
#3
* Abilene ** Abilene *
User avatar
  • Joined: August 15th, 2014, 10:08 am
  • Posts: 34

Can't ask for better supporter or better people.

YS1500
October 2nd, 2014, 11:03 am
#4
* Wichita ** Wichita *
User avatar
  • Joined: August 15th, 2014, 4:08 pm
  • Posts: 162
  • Location: Lincoln, NE

I've had nothing but wonderful experiences myself. I agree that better cannot be found in the industry.

Yoder Smokers YS1500, Yoder Smokers 24" Firepot, Yoder Smokers YS640 CompCart(sold)
October 10th, 2014, 7:54 pm
#5
* Abilene ** Abilene *
  • Joined: September 19th, 2014, 8:07 pm
  • Posts: 1

One of the reasons why I went Yoder...Customer Service is great!

October 11th, 2014, 11:18 pm
#6
* Abilene ** Abilene *
  • Joined: August 30th, 2014, 11:15 pm
  • Posts: 26
  • Location: Tucson, AZ

Ditto!!!!!

Terry
October 12th, 2014, 9:22 am
#7
* Abilene ** Abilene *
  • Joined: August 15th, 2014, 11:44 am
  • Posts: 33
  • Location: Argyle, TX

Well it seemed that the thermocouple was just part of the problem. Monday my new controller should arrive. So I figured since Yoder was already sending me a package, I ordered the new burn pot and burn grate. Saturday will be a busy day.

October 15th, 2014, 1:19 pm
#8
* Kingman ** Kingman *
User avatar
  • Joined: August 25th, 2014, 10:28 am
  • Posts: 268

smokinginargyle wrote:Well it seemed that the thermocouple was just part of the problem. Monday my new controller should arrive. So I figured since Yoder was already sending me a package, I ordered the new burn pot and burn grate. Saturday will be a busy day.



Can't imagine a much better day than spending all day w/ your smoker! :mrgreen: Good luck w/ the installs.

Return to Pellet