Discuss, share information, ask questions, and show off your expertise on Yoder Pellet Cookers.

Click the links below to go directly to available resources:
**Pellet cookers** - YS480, YS640
**Competition Pellet cookers** - YS480 Comp, YS640 Comp, YS1500 Comp, Cimarron Comp
**Pellet Cooker Warranty**
June 14th, 2020, 5:03 pm
#1
* Abilene ** Abilene *
  • Joined: July 10th, 2017, 3:58 pm
  • Posts: 34

The lid gasket on my YS 640, build date October 2017, is coming off. There are several spots where the gasket is torn or pieces hanging down. It may be my fault from cleaning the lid and scraping the grease build up. Is there a gasket replacement kit I can order or is this something I can buy at Lowe’s? I see a gasket replacement on ATTBQ but I am not sure it is the right kit for my build. Thanks.

June 14th, 2020, 7:19 pm
#2
* Abilene ** Abilene *
  • Joined: January 18th, 2016, 8:57 pm
  • Posts: 26

Yes the Yoder lid gasket kit on ATBBQ is the correct one for your model. It will come with shims for the hinges, that you wont need, as yours will already have them installed. Or you can look on Amazon and find a roll of 1/2" wide gasket material. Just make sure you order enough, or more for next time. You will need 102" for your YS640 lid. Hope that helps answer your question.

June 15th, 2020, 11:25 am
#3
* Abilene ** Abilene *
  • Joined: July 10th, 2017, 3:58 pm
  • Posts: 34

Thanks very much. If I order from Amazon, is this the correct gasket material?
"FireBlack Hi Temp BBQ Smoker Gasket Self Stick 15 ft High Heat 1/2 x 1/8 Black"
Is 1/8 the correct thickness?

June 15th, 2020, 12:18 pm
#4
* Abilene ** Abilene *
  • Joined: January 18th, 2016, 8:57 pm
  • Posts: 26

Yes that is the same thickness I ordered. It will work

June 15th, 2020, 3:29 pm
#5
* Abilene ** Abilene *
  • Joined: July 10th, 2017, 3:58 pm
  • Posts: 34

Thanks very much.

Return to Pellet


cron