Page 1 of 1

YS640

PostPosted: August 15th, 2014, 10:59 am
by dsgarner06
Here is my YS640... I love this awesome cooker!

Re: YS640

PostPosted: August 15th, 2014, 12:05 pm
by boblrn
Nice!!

Re: YS640

PostPosted: August 15th, 2014, 6:21 pm
by Saguaromike
Ds, what is that on your front shelf? A light?

Re: YS640

PostPosted: August 24th, 2014, 6:52 am
by icestud
Good looking Smoker you have there :D How are the thermal blankets attached?

Thanks Matt

Re: YS640

PostPosted: August 24th, 2014, 9:40 am
by Yoder_Kirby
icestud wrote:Good looking Smoker you have there :D How are the thermal blankets attached?

Thanks Matt


Good question. The thermal jacket comes in three parts. First is a small section that goes below the door on the front. I has two "clips" that just slide onto the body of the cooker below the opening when the door is open. Second is a section that attaches in the same manner to the bottom of the door with there "clips" and goes up the body right to the counterweight. Then there is a series of clips that attach the door piece to the third piece that covers the back of the cooker. Then with the door closed there is a strap that connects piece one and piece three around the body of the cooker.

Hopefully this picture may help.

Image

Re: YS640

PostPosted: August 24th, 2014, 10:00 am
by icestud
Thanks Kirby,

Maybe the use of rare earth magnets sewn into the blanket would be an idea for future revisions, just a thought