Discuss, share information, ask questions, and show off your expertise on Yoder Pellet Cookers.

Click the links below to go directly to available resources:
**Pellet cookers** - YS480, YS640
**Competition Pellet cookers** - YS480 Comp, YS640 Comp, YS1500 Comp, Cimarron Comp
**Pellet Cooker Warranty**
November 28th, 2018, 6:01 pm
#1
* Abilene ** Abilene *
  • Joined: September 10th, 2014, 6:09 pm
  • Posts: 3

I have had my 640 for a few years and have noticed that the powder coating on the inside of the lid is flaking badly. Everytime I smoke I have to be sure and scrape off the underside of the lid so that it doesn't fall into the meat. Anybody else having this issue?

Thanks,

Greg

November 28th, 2018, 9:36 pm
#2
Site AdminSite Admin
User avatar
  • Joined: April 18th, 2014, 3:12 pm
  • Posts: 2408

More than likely it is not paint, but rather cooking debris. About 3 years ago I scraped the entire underside of the lid down to the metal, and then sprayed the cleared area with canola oil and cooked it for an hour at 350. After cooking completely, I sprayed the underside of the lid again with canola oil and cooked it again for an hour at 350. This will season the metal.

Yoder_Herb
November 29th, 2018, 11:58 pm
#3
* Cheyenne ** Cheyenne *
  • Joined: May 18th, 2015, 9:25 pm
  • Posts: 62

I agree with Yoder_Herb. Sounds like a bad case of creosote.

December 2nd, 2018, 10:58 am
#4
* Abilene ** Abilene *
  • Joined: September 10th, 2014, 6:09 pm
  • Posts: 3

I'll give that a try. Thanks for the info.

Greg

Return to Pellet


cron