Discuss, share information, ask questions, and show off your expertise on Yoder Pellet Cookers.

Click the links below to go directly to available resources:
**Pellet cookers** - YS480, YS640
**Competition Pellet cookers** - YS480 Comp, YS640 Comp, YS1500 Comp, Cimarron Comp
**Pellet Cooker Warranty**
November 24th, 2018, 7:42 pm
#1
* Abilene ** Abilene *
  • Joined: January 31st, 2018, 10:28 pm
  • Posts: 8

Two questions,

1) How do I or should I clean the thermocouple?

2) For the first two times ever I have had large temperature variations on my YS-640. Set up is BBQ Delight Pellets (hickory/pecan). First cook with temp variance I was smoking a turkey with set temp of 325. Bird was spatchcocked 13.5 lbs. I did have a water pan with vegetables, turkey parts, and water under the bird for gravy. Had two Maverick digital thermometers running on either side of bird. To keep it at 325 grate temp had to run grill at 425. Ambient temp low 60’s and grill out of wind. When grill said 325 grate temps were 225-230. This was new me as usually the top grate is within 8 -10 degrees of Temp showing on Mavericks. Thought it might just be large gravy pan being a heat sink. Then today was cooking jalapeño poppers at 350. After waiting 30 minutes with grill at its “set point” 356 my maverick probes showed 320 on RT and 316 on LT. Put poppers on and Turned grill up to 375, cooked for 25 minutes. Food was done, however Maverick probe on top was 308 and bottom just RT of middle was 320. Ambient temp in the 40’s, but, was out of the wind.

Appreciate any thoughts and help.

Paul

November 24th, 2018, 9:01 pm
#2
Site AdminSite Admin
User avatar
  • Joined: April 18th, 2014, 3:12 pm
  • Posts: 2408

Yes, keep the thermocouple clean. It doesn't have to look like it did when new. Just use a paper towel and gently clean the thermocouple. If it is really bad, use a green scratch pad to gently clean it. Do not get it wet where the lead goes into the back.

Your temperatures issues were caused by the pan. Take a look at this: viewtopic.php?f=36&t=1392

Yoder_Herb
November 25th, 2018, 8:42 pm
#3
* Abilene ** Abilene *
  • Joined: January 31st, 2018, 10:28 pm
  • Posts: 8

Thanks Herb. I’m thinking cleaning thermocouple will also help as it was off on jalapeño poppers, though not as bad. Usually she is spot on.

Certainly appreciate your help.

Return to Pellet