Discuss, share information, ask questions, and show off your expertise on Yoder Pellet Cookers.

Click the links below to go directly to available resources:
**Pellet cookers** - YS480, YS640
**Competition Pellet cookers** - YS480 Comp, YS640 Comp, YS1500 Comp, Cimarron Comp
**Pellet Cooker Warranty**
March 31st, 2018, 8:47 am
#1
* Cheyenne ** Cheyenne *
User avatar
  • Joined: March 11th, 2018, 7:11 pm
  • Posts: 79
  • Location: Morrill, Nebraska

On my rec tec mini, I didn't worry about a dual zone for low and slow like I would with my weber kettle. With the 640 I was wondering if it's best practice to push the damper in as far as necessary to provide an area as large as the meat you are cooking.

I read the "Variable Damper Best Practices" doc Herb posted, and from what I gather I can just set the temp and let the cooker do it's thing, but thought I'd run this question by the group.

Thanks in advance!

Yoder 640 on a Husker themed comp cart. Go Big Red!
March 31st, 2018, 10:16 am
#2
* Kingman ** Kingman *
  • Joined: September 3rd, 2014, 11:04 pm
  • Posts: 422

I have set my dmpner to 5" in within a year of buying it and never move it. You can play with it. You won't get a 500f on one side and a 250f on the other side no matter what. The upper shelf to the left is the coolest spot.

March 31st, 2018, 11:21 am
#3
* Wichita ** Wichita *
  • Joined: July 25th, 2015, 1:21 pm
  • Posts: 145

Same here. The first few months I played around with different positions but in the end have not moved it for nearly 4 years. I am sure there is a difference but the more I tried to out think the pit the more I realized that the continuity of leaving it in one place outweighs my perceived cooking instincts.

March 31st, 2018, 11:44 am
#4
* Kingman ** Kingman *
  • Joined: September 3rd, 2014, 11:04 pm
  • Posts: 422

Let me edit that, I notched my damper rod and I pull it out 5". Stays there.

Return to Pellet