I just used Herb's method of reverse searing a ribeye. Best damn steak I've had in a long time. Wife raved over them and she's one of those that doesn't particularly like to eat red meat. Said she'd eat steaks all the time if they always tasted like this.
I do have a question regarding the process. The instructions said to remove the lower grates and put GrillGrates on the chimney side until searing time. Is there a reason the lower grates would have to be removed? Could they be left in and just stacked to one side?
Depending on how you "stack" the grates, the lid may not close.
I move the grill grates over to the right to keep them from interfering with the temperature during the smoking portion of the process, then move them to the left during the searing part of the process to make use of their ability to amplify the heat from the heat diffuser plate.
Can the original grates be used as direct grilling grates if you don't have GrillGrates?
Dr ROK wrote:Can the original grates be used as direct grilling grates if you don't have GrillGrates?
Thanks for the speedy response Herb! One more question, I have shorter GrillGrates, but they are not long enough to fit where the original grates set. Can they be place directly on the diffuser with the door removed?
Dr ROK wrote:Thanks for the speedy response Herb! One more question, I have shorter GrillGrates, but they are not long enough to fit where the original grates set. Can they be place directly on the diffuser with the door removed?
I'm not planning on using the chrome grates, there would only be the aluminum GrillGrates setting directly on the diffuser stretched across the door opening. Will that work?
Never did that, but it would sure limit the usable grilling area to just the door opening. The grill grates have a melt point of somewhere over 1200 degrees.