Page 1 of 1

Metal Thickness 3/16" or 1/4"???

PostPosted: April 29th, 2017, 4:53 pm
by cbbq
I have heard several people say that the metal thickness of all Yoder stick burners is 1/4". But...I was looking at the FAQ page on the Yoder website recently and they say "All Yoder Smokers wood pits are produced from new 3⁄16" or 1⁄4" steel pipe & plate." So which is it? Can anyone confirm this? Thanks!

Re: Metal Thickness 3/16" or 1/4"???

PostPosted: April 30th, 2017, 10:42 am
by Yoder_Herb
The Cheyenne is 3/16"

Re: Metal Thickness 3/16" or 1/4"???

PostPosted: April 30th, 2017, 11:41 am
by cbbq
So the Kingman is 1/4"?

Re: Metal Thickness 3/16" or 1/4"???

PostPosted: April 30th, 2017, 11:58 am
by Yoder_Herb
All others are 1/4". Feel free to call 877.409.6337, extension 1 for any questions or to order.

Re: Metal Thickness 3/16" or 1/4"???

PostPosted: April 30th, 2017, 12:08 pm
by cbbq
Thanks Herb!

Re: Metal Thickness 3/16" or 1/4"???

PostPosted: May 2nd, 2017, 2:03 pm
by Doyle1524
On all things bbq website it says that the Yoder Cheyenne is Constructed from NEW 1/4" pipe and plate. Is that correct?

Re: Metal Thickness 3/16" or 1/4"???

PostPosted: May 2nd, 2017, 3:52 pm
by Yoder_Herb
It is 3/16"

Re: Metal Thickness 3/16" or 1/4"???

PostPosted: June 18th, 2018, 2:10 pm
by mi7chgo
When did Yoder make this production change? I have recently acquired a Yoder Cheyenne (second-hand) that was constructed in 2011. Was it 3/16" back then or is that a more recent change?

Re: Metal Thickness 3/16" or 1/4"???

PostPosted: June 18th, 2018, 4:21 pm
by Yoder_Herb
The Cheyenne has always been 3/16