Discuss, share information, ask questions, and show off your expertise on Yoder Stick Burners.

Click the links below to go directly to available resources:
**Backyard** - Cheyenne, Wichita, Loaded Wichita, Kingman, Durango 20", Durango 24", Stockton
**Trailer Mounted** - Santa Fe, Chisholm, Frontiersman
**Competition** - Cimarron, Kingman, Frontiersman
**Custom Trailers, Combinations and Competition Cookers**
January 16th, 2017, 9:55 pm
* Abilene ** Abilene *
  • Joined: March 11th, 2016, 7:02 am
  • Posts: 15

Hi, I would like to remove the damper wheel from the firebox door, and replace it upside down so that the handle to adjust the damper setting is protruding from the lower opening (rather than the higher opening)

I had a quick look, and when viewed from the outside of the firebox the bolt that secures the damper wheel has a smooth surface so wasn't sure how to undo it.

Can you please help me with some advice of which tools and method I should use to do this.

Many thanks!!!!

January 17th, 2017, 1:09 am
Site AdminSite Admin
User avatar
  • Joined: April 18th, 2014, 3:12 pm
  • Posts: 2151

Remove the nut on the inside of the door with a wrench or adjustable wrench.


Return to Stick Burners